How to remove mud residue from ATV

Removing mud residue from ATV

Thanks to nature, ATV riders have multiple choices when it comes to choosing the type of trail for ATV riding. Avid enthusiastic ATV riders also have found their favorite choice of trail that they explore often. Besides the sandstone hills, dunes, and forests, a huge majority of the ATV riders population across the US absolutely love the experience of Mud Trail riding. Although the All-Terrain Vehicles are manufactured for accomplishing the impossible, they need some crucial after-care when the ride gets completed for the day. ATVs remain in most need of a proper, informed cleaning when a mud-major trail is explored without worrying about the ATV condition.

After getting the adrenaline rush from hitting the mud holes and soft soil quad regions it’s always necessary to clean up your vehicle in an effective way. Some ATV riders quite strikingly leave the vehicle partly unclean after just throwing water at the main exposed regions, oftentimes they claim to be hitting a similar mud trail again within the next two days. This isn’t the right thing to do, settling mud on different parts of the ATV has the capability to cause substantial damage leading to foul expenditure requirements.

A huge number of ATV riders acknowledge the negative effects of mud residue and try an earnest clean-up formulated on their own. We clap for you, congratulations on not being a procrastinator and taking the cleaning task with utmost seriousness. On this page, you will get step-by-step details of professional mud residue removal techniques that can be implemented practically with every detail.

An ATV getting hosed down with soap water.
An ATV getting hosed down with soap water.

 

The Integrated Wash-up for a Mud enveloped ATV 

  • Hitting Gently around the Vehicle- If your ATV got deeply immersed in mud and still holds large patches of it while being totally covered in soil then directly going for a pressure wash might not be the right fit. Experts suggest using an object like a rubber mallet or a hammer with a rubber covering for tapping around your vehicle. These gentle blows around the vehicle will let off the non-patchy large chunks, this would largely help in avoiding a mud mess. Directly throwing water to the highly mud-covered ATV can create blots of mud that can get further troublesome to completely remove.

A non-pressurized general throw of water through a hose or sprayer is required to carry out the primary water soaking process. Yes, you will be gently carrying out this basic water routine with the aim of getting the entire mud on the ATV to receive proper water content to get soaked and enlightened up.

  • Fire the Water Jet-The end part of the previous mud watering step should be repeated a couple of times if the mud had dried up totally on the ATV or there are extreme amounts of mud around the vehicle. After you have carried out the previous step successfully the mud is bound to get softer and this would be the basic stepping stone in getting a satisfying professional clean-up. You may use the regular garden hose with a pressure spraying nozzle but Mud cleaning experts have frequently been vocal about the super effectiveness of an original pressure washer. You need to use the setting of low pressure and even use a broad tip to handle the pressure washing equipment perfectly and also not cause any damage to the ATV.

The most vulnerable parts of ATV that get damaged from a very high impactful pressure washing are the radiator, gas tank, stickers, fuse box, air box and CV boots, so it’s better to avoid these regions. ATV experts have suggested that there are few ATVs in the market that are not meant to be pressure washed even at a low setting and this comes properly highlighted in the owner’s manual. So check into your manual and if it restricts you from using a pressure washer on it then use a strong water flow through a general pipe that will have a considerable strong force. The objective of this step is to remove the soft mud patched around the ATV by strong water impact.

 

  • A Good Old Scrub- Oftentimes the pressure washing or water impact removes the majority of the mud, but if still mud blots remain in a few spots of the ATV buckle up for making up your ATV shiny as new.This is where the smart-scrubbing step comes into play, get a proper car washing soap, a bucket of water and a good quality sponge. Get a large sponge so that you can use it efficiently with reduced manual labor. Experts suggest keeping a bristle brush handy too as it will help in clearing adamant mud spots that are dried mostly at the core.

The oil-ridden parts of the ATV like the swing arm and the chain guard when caked in mud can become a little troubling as the mud can get attached strongly like a sticky form. ATV experts recommend first checking the condition of these specific parts after the pressure wash and getting a degreaser and applying it with patience in a limited quantity.

A common leaf blower in canada that can be used. -  Mud Residue Removal Tool
A common leaf blower in canada that can be used. – Mud Residue Removal Tool

 

  • Drying naturally and unnaturally- You have successfully completed the professional mud residue removal from your ATV when the above step gets finished. It’s just the small task of letting the ATV dry on which you can interfere or not based on your convenient choice. If the sun seems too harsh or it’s raining then keeping your ATV outside to dry is not a suitable option. In such a scenario you can use the regular leaf blower to dry it up inside a shade. Using the leaf blower comes with two rigid advantages. The first benefit is that if any small debris and dust remain accumulated in the lean gaps that get removed by the strong air from the blower.

The other prime advantage is that the leaf blower works as a replacement for towels. When towels are used for the end drying process, oftentimes they get extremely soiled and require a detergent wash, sometimes more than once too.

Taking some extra measures for 99% mud residue removal from ATV   

  • When you start the ATV cleaning process you should always check if the vehicle engine has cooled down or not. Immediately after returning from the trail ride, you shouldn’t indulge in the washing process. The expert’s time-saving tip is to go get yourself atleast partially cleaned up while the ATV sits under a shaded region letting its exhaust and engine cool off.
  • After the rubber mallet step as mentioned earlier, you can choose to apply some thin cover at the most water-damage vulnerable locations including the ignition switch, rear muffler opening and radiator. You can use plastic bags and tapes as protection equipment for your ATV.
  • ATV specialists have also often claimed on the internet to use a lint-free towel. This is a special kind of towel that doesn’t produce fluff while being used. Using such items and a leaf blower as suggested before also eradicates the chances of weird water spots and even reduces the chances of corrosion.
  • After the cleaning process including the drying up of the ATV is completed, it’s quite intelligent to use a rust inhibitor on the metal surfaces on the ATV. But the rust inhibitor should be carefully handled and the instructions written on the specific product should be reliably followed.        

1 thought on “How to remove mud residue from ATV”

Leave a Comment